Rubber-Coated Neodymium Pot Magnets with Eye

Description

Hold-down points without drilling

On steel roofs, rubber-coated pot magnets give you extra tie-down points for SRM without making any holes in the roof sheet. Tie the matting or rope to the eye with a UV-resistant cable tie and place the magnet on the sheet. The soft rubber coating protects the roof’s paint finish and improves grip against sliding.

*Catalogue pull force measured straight off a thick, flat steel plate. On thin roof sheeting (typically 0.5–0.7 mm), through paint, or on a profiled surface, holding force is much lower — and resistance to sliding (shear) is typically only around a third of the pull force. Use magnets as additional hold-down points alongside a properly anchored wire rope restraint system, not as the only fixing, and check them at every inspection.

• Neodymium (NdFeB) magnet in a steel pot, encased in black thermoplastic rubber
• Removable screw-in eye
• Maximum operating temperature typically 60–80 °C depending on size
• Works on steel (ferrous) roofs only — not on aluminium or fibre cement

Handle with care: these are very strong magnets. Keep fingers clear when they snap together or onto steel, and keep them away from pacemakers, electronic devices and bank cards.

Prices on request — use the form below to tell us the sizes and quantities you need, and we’ll come back to you with a price including UK delivery. We can also put together a complete fixings kit for your roof alongside your Silent Roof Material order.

Image: illustration shown for reference.